Compatibility Matrix · editor

Step 1 of 3

Design & Setup

Frame the document before you fill it in: the brand it carries and the page it prints on. Everything updates the preview instantly.

TemplateTemplate
BrandBrand kitManage brand kits ↗

This document uses your workspace brand kit for its logo, colors, and fonts. Add more brand kits to switch between them here.

These apply to this document only and start from the brand kit. To change your brand everywhere, edit the brand kit.
LookDesign look
PagePage setup
Margins are the whitespace framing the page. Around 0.5″–1″ is standard for print; go much smaller and part of your document may be cut off when it's printed.
Next: add sections, blocks, and your header and footer.
Live US Letter portrait preview1 page
75%

Nexus N-1 Controller & I/O Modules

Compatibility matrix · base units, I/O modules and firmware

Category
Automation
Model
N-1

The Nexus N-1 base units accept a mix of I/O modules on a shared backplane. This matrix shows which modules are supported by each base unit and the minimum firmware each requires.

The module catalogue
ModuleFunctionChannels
NX-DI16Digital input16 × 24 V DC
NX-DO16Digital output16 × relay / transistor
NX-AI8Analogue input8 × V / mA / RTD
NX-AO4Analogue output4 × V / mA
NX-RTD6Temperature6 × RTD / thermocouple
NX-MOT2Motion2 × stepper / servo axis
Modules by base unit
ModuleN-1 LiteN-1 StandardN-1 Pro
NX-DI16 digital inYesYesYes
NX-DO16 digital outYesYesYes
NX-AI8 analogue inYesYesYes
NX-AO4 analogue out—YesYes
NX-RTD6 temperature—YesYes
NX-MOT2 motion——Yes
Base-unit summary
Base unitSlotsMin. firmwareAdds
N-1 Lite41.0DI16, DO16, AI8
N-1 Standard82.0+ AO4, RTD6
N-1 Pro122.4+ MOT2 motion
Reading the grid
Yes = supported on that base unit · — = not supported. Analogue-out and motion modules need firmware 2.4 or later. A base unit takes any mix of modules up to its slot count.
Demo preview · sign up to remove the watermark