Product Selection Guide · editor
Step 1 of 3
Design & Setup
Frame the document before you fill it in: the brand it carries and the page it prints on. Everything updates the preview instantly.
TemplateTemplate
BrandBrand kitManage brand kits ↗
This document uses your workspace brand kit for its logo, colors, and fonts. Add more brand kits to switch between them here.
These apply to this document only and start from the brand kit. To change your brand everywhere, edit the brand kit.
LookDesign look
PagePage setup
Margins are the whitespace framing the page. Around 0.5″–1″ is standard for print; go much smaller and part of your document may be cut off when it's printed.Next: add sections, blocks, and your header and footer.
SV-Series Solenoid Valves
Selection guide · direct-acting & servo-assisted, DN8–DN50
The SV-Series covers general-purpose media control from DN8 to DN50 in brass and stainless bodies. This guide narrows the range to a model by media, orifice, pressure and coil, and gives the order code for each.
How to select
Work in four steps: pick the body material for the media, the orifice for the required flow, the pressure rating for the line, and the coil voltage.
Answer these
Is the media corrosive or high-purity?SV-20X stainless body
Is it steam or hot condensate?SV-15S PTFE seat
Is line size DN40 or larger?SV-50B servo-assisted
Otherwise (water / air)SV-15B brass body
Selection table
| Application | Model | Pressure (max) | Order code |
|---|---|---|---|
| Water / air, DN8 | SV-08B | 0–10 bar | SV-08B-024DC |
| Water / air, DN15 | SV-15B | 0–12 bar | SV-15B-024DC |
| Steam, DN15 | SV-15S | 0–8 bar (180 °C) | SV-15S-230AC |
| Corrosive media, DN20 | SV-20X | 0–10 bar | SV-20X-024DC |
| High flow, DN50 | SV-50B | 0–6 bar | SV-50B-230AC |