Product Specification Sheet · editor
Step 1 of 3
Design & Setup
Frame the document before you fill it in: the brand it carries and the page it prints on. Everything updates the preview instantly.
TemplateTemplate
BrandBrand kitManage brand kits ↗
This document uses your workspace brand kit for its logo, colors, and fonts. Add more brand kits to switch between them here.
These apply to this document only and start from the brand kit. To change your brand everywhere, edit the brand kit.
LookDesign look
PagePage setup
Margins are the whitespace framing the page. Around 0.5″–1″ is standard for print; go much smaller and part of your document may be cut off when it's printed.Next: add sections, blocks, and your header and footer.
State & Lake LA-24 Linear Actuator
Electric linear actuator · 24 V DC · 2500 N
The LA-24 is a compact 24 V DC electric linear actuator with an integrated position sensor and IP66 sealing for outdoor and washdown duty. Stroke lengths from 100 to 500 mm deliver up to 2500 N with built-in end-of-stroke limits and reverse-polarity protection.
Specifications
| Stroke length | 100 / 200 / 300 / 500 mm |
| Rated force (push/pull) | 2500 N |
| No-load speed | 24 mm/s |
| Duty cycle | 25% (S3) |
| Supply voltage | 24 V DC ±10% |
| Rated current | 3.5 A |
| Position feedback | 10 kΩ potentiometer / 0–10 V |
| Protection | IP66 |
| Operating temperature | −26 to +65 °C |
| Self-locking | Yes (ACME screw) |
Electrical & environmental
| Motor type | Brushed DC, permanent magnet |
| Inrush current | 8 A (100 ms) |
| No-load current | 0.8 A |
| End-of-stroke limits | Built-in, non-adjustable |
| Storage temperature | −40 to +85 °C |
| Relative humidity | 0–95%, non-condensing |
| Vibration | 5 g, 10–500 Hz (IEC 60068-2-6) |
| Shock | 30 g, 11 ms (IEC 60068-2-27) |
Key dimensions
| Retracted length | stroke + 160 mm |
| Body diameter | 44 mm |
| Mounting-eye bore | 8 mm (both ends) |
| Clevis pin spacing | 20 mm |
| Cable entry | M16 gland, 1 m lead |
Tolerances
Tolerances
| Characteristic | Nominal | Tolerance |
|---|---|---|
| Stroke length | nominal | ±1.5 mm |
| Mounting-eye bore | 8.0 mm | +0.05 / −0 |
| Retracted length | stroke + 160 mm | ±2 mm |
| Backlash | 0.3 mm | max |
Motor & feedback wiring
| Pin | Function | Wire | Notes |
|---|---|---|---|
| 1 | Motor + | Red | Extend on +24 V |
| 2 | Motor − | Black | Retract on +24 V |
| 3 | Feedback wiper | White | 0–10 V / pot. wiper |
| 4 | Feedback + | Blue | +10 V reference |
| 5 | Feedback − | Green | 0 V reference |
Ordering information
| Order code | Stroke | Rated force | Feedback |
|---|---|---|---|
| LA-24-100 | 100 mm | 2500 N | Potentiometer |
| LA-24-200 | 200 mm | 2500 N | Potentiometer |
| LA-24-300 | 300 mm | 2000 N | 0–10 V |
| LA-24-500 | 500 mm | 1500 N | 0–10 V |
Accessories
| Order code | Accessory | Notes |
|---|---|---|
| LA-BRK-C | Clevis mounting bracket | Zinc-plated steel, both ends |
| LA-BRK-T | Trunnion mounting kit | Mid-body pivot mount |
| LA-CBL-5 | Extension cable, 5 m | IP66, pre-wired to flying leads |
| LA-CTL-1 | In-line controller | Limit relays and reverse contactor |
| LA-POT-EXT | External feedback module | 10 kΩ potentiometer, panel-mount |